Five waveforms are on the A-145-1 available: sawtooth, inverted sawtooth, triangle, sine and square wave.
The LFO can be used as a modulation source for any number of modules - for instance modulating the pulse width or frequency of a VCO, modulation of the cut-off frequency of a VCF, or amplitude modulation with a VCA.
A three-way switch lets you select three frequency ranges, spanning from one cycle every several minutes at the lowest, to moderate audio frequency at the highest (about 4-5 kHz).
The LFO signal can also be synchronised, via the reset input.

Typical frequency ranges depending upon the position of the Frequ. Range switch:

• H: about 10Hz - 4.5kHz
• M: about 0.1Hz (10 seconds period) - 50Hz
• L: about 0.005 Hz (3.5 minutes period) - 5Hz

For more detailed information please look at the user's manual A145_man.pdf

Remark: Module A-145 will be renamed to A-145-1 to distinguish it better from other modules of the A-145 series (e.g. A-145-4)

Five waveforms are available: sawtooth, inverted sawtooth, triangle, sine and square wave. The LFO can be used as a modulation source for any number of modules - for instance modulating the pulse width or frequency of a VCO, modulation of the cut-off frequency of a VCF, or amplitude modulation with a VCA.

A three-way switch lets you select three frequency ranges, spanning from one cycle every several minutes at the lowest, to moderate audio frequency at the highest (about 4-5 kHz).

The LFO signal can also be synchronised, via the reset input.