LMK2+ is a low cost MIDI masterkeyboard with 4 keyboard zones, 2 wheels and after touch. It is suitable for all applications where the extraordinary masterkeyboard functions of the LMK4+ are not required but a high quality keyboard is indispensable.
This is the version without case.
-
The LMK plus series of MIDI Masterkeyboards established in the musician scene during the last few years. All keyboards of the LMK-plus series are equipped with the same high quality 88 keys piano-type keyboard TP/40GH with real hammer mechanics. This type of hammer mechanics does not compare to low cost hammer mechanics offered by some competitors (not only a simple metal lever beyond each key).
The most important features of LMK2+ at a glance:
- high quality keyboard with real piano style action and hammer mechanics, 88 keys
- black flightcase with handle and removable lid
(not suitable for shipment via mail/ parvel service/ UPS/ railway/ airfreight and so on, for that the original carton has to be used) - Velocity resolution max. 127 steps resolution, dependig upon selected velocity curve
- 8 velocity response curves
- Monophonic aftertouch (channel aftertouch)
- 2 wheels: the spring-loaded one is used for pitch-bend, the other can be assigned to any Midi controller from #0...#31 (e.g. #1 = Modulation)
- 3-digit LED display
- 8 menu-buttons with LED indicators
- External 1/4" input-jack for double-footswitch (Sustain and Sustenuto function, e.g. our VFP2, see accessories)
- External 1/4" input-jacks for sweep pedal (Volume function, e.g. our FP5, see accessories)
- After-Touch, Wheels, external Footswitches and Pedal can be turned on/off for each zone
- Adjustable velocity reduction factor for black keys
- non volatile memory for the last keyboard configuration (user preset)
- additionally 16 fixed factory presets (cannot be modified by the user
- Sending of the following messages (in combination with keyboard keys)
- Midi program change (4 sets with 32 each in combination with 32 keyboard keys)
- Midi-program-bank, i.e. Midi control changes #0 and #32 (4 sets with 32 each incombination with 32 keyboard keys)
- Start, Stop, Continue
- All notes off on all Midi channels (panic key)
-
4 overlapping keyboard-keyboard zones. The following features can be defined/adjusted by the user in each of the 4 zones
- upper / lower key
- Midi channel (1...16)
- any transposition in semitone increments/ decrements
- selection of one of 8 velocity response curves
- Controller number for wheel 2
- wheel 1 on/off
- after-touch on/off
- foot switch 1 on/off
- foot controller on/off
- Piano mode on/off (i.e. sending of a note-on event at minimal key motion)
- XLR connector for external power supply
- new version (with USB):external AC adapter for power supply (same as old version) or power supply via USB connector (the USB host has to be able to supply 200mA)
Important notes:
The installation versions of our master keyboards PK88/LMK2+/LMK4+ without housing are so-called OEM products! These products may only be installed by specialists who are experienced in handling sensitive mechanical and electronic components and who have the necessary tools for commissioning and, if necessary, troubleshooting. We expressly point out that incorrect handling of the components can lead to serious damage that is not covered by the device warranty.
A return or warranty repair of defective components is only possible if they are in their original condition. Components that have been soldered to by the customer or that have been mechanically processed/modified are excluded from return or warranty repair.
When returning the keyboard, it is mandatory to use the special packaging (product packaging + additional padded transport packaging), otherwise there is a high probability of transport damage that is not covered by the device warranty.
We strongly recommend reading the following technical documents before purchasing the built-in version of the PK88/LMK2+/LMK4+.We strictly recommend to read these technical documents before you order the OEM version of the LMK2+:
